Oils & Lacquers
Kahrs
| Kährs Lacquer, satin 1 litre and 5 litre. |
|
BONA PRIME CLASSIC
Product Description
Features
Bona Prime Classic is a one-component waterborne acrylate primer for use on wooden floors prior to overcoating with Bona waterborne finishes. It gives the surface a well-bodied look and reduces the risk of grain raising.
- Designed for use with all Bona waterborne finishes
- High solids content
- Well-bodied surface
- Reduced risk of side bonding, i.e. especially suitable for endgrain floors, softwood plank floors and hardwood floors with underfloor heating.
Coverage approximately 8-10m
BONA MEGA
Product Description
Features
Mega is a one-component waterborne 100% polyurethane finish for the surface treatment of wooden floors in commercial and domestic areas subject to heavy wear. As crosslinking is achieved using the oxygen in the air, Mega has the performance of a two-component finish without requiring any mixing. It has all the advantages of a waterborne system and has a solvent content of approx. 5%.
- Easy to use – one component with userfriendly properties.
- High resistance to wear, scuff marks and scratches
- Very good chemical resistance
- 2.1/2 – 3 hours drying time
- Coverage approximately 8-10m
BONA TRAFFIC
Product Description
Features
Traffic is a two-component waterborne 100% polyurethane finish for the surface treatment of wooden floors in commercial premises where a very high resistance to wear is required. It is also suitable for overcoating factory pre-finished cork floors. Traffic Matt provides a clear natural appearance giving “invisible protection” and the look of an oiled floor but, unlike oil, offers years of virtually maintenance-free protection. Traffic Silk Matt has a higher sheen level but all the other qualities of the matt version.
- Contains less than 10% solvents
- Superb scratch and chemical resistance
- High scuff resistance
- Non-yellowing surface
- Meets DIN norm 18 032 and BS 7044:1990 for slip resistance
- Meets ÖNORM C 2354 Category C (very heavy wear)
- 3-4 hours drying time
- Coverage approximately 8-10m
POLYX®-OIL - the original Hardwax-Oil
- The original Osmo Polyx®-Oil is ideal for DIY use and is easy to apply
- Easy application with the Osmo Floor Brush or the Osmo Floor Roller Set
No. of coats required: 2 (no primer) Renovation: 1 coat
Coverage: 1 ltr = approx. 12 m, two coats = approx. 20 m, one coat
Can sizes: 0.375 litres; 0.75 litres; 2.5 litres; 10 litres; 25 litres
POLYX®-OIL RAPID - the original Hardwax-Oil
- Quick drying floor finish, especially for professional users
- Quick drying - 2 coats in one day!
- To apply Polyx®-Oil Rapid we recommend the use of an Osmo Floor Brush or Roller and Brush Set
No. of coats required: 2 (no primer) Renovation: 1 coat
Coverage: 1 ltr = approx. 12 m, two coats = approx. 20 m, one coat
Can sizes: 0.375 litres; 0.75 litres; 2.5 litres; 10 litres; 25 litres
WOOD WAX FINISH Clear Extra Thin
- Clear primer for your wood - especially for woods with high oil content such as merbau, wenge, jatoba etc.
- Transparent - satin-matt
- Particularly deep-penetrating
- The wood is fully protected, becomes water-resistant and will be able to breathe
- May be applied by brush, cloth, dipping or spraying
- Available in 0.75 and 2.5 litre drums - for professionals also in 25 litre drums
- 1 Litre covers approx. 16 m
Junckers Rustic Oil
