Multi Acoustic Roll is lightweight, flexible mineral wool roll which meets the density criteria for absorbent layers in type 3 timber floors. It can also be used in various Robust Detail floor & wall applications.
Multi Purpose Acoustic Mat is a flexible resilient unfaced roll of mineral wool, designed to be used as an absorbent layer in timber and metal stud internal walls and partitions. It can also be used in type 4 timber framed separating walls and meets the requirements for the absorbent layer in certain Robust Detail floors.
Multi Acoustic Roll is lightweight, flexible mineral wool roll which meets the density criteria for absorbent layers in type 3 timber floors. As detailed in these documents, the density of the product must be a minimum 10kg/m3 and 12kg/m3 respectively. It can also be used in various Robust Detail floor & wall applications.
Nothing could be simpler than installing Rockwool volcanic rock roll. It’s designed to accurately fit between either 600mm or 400mm centre timbers.
Rockwool RollBatt is supplied in 2 x 600mm rolls or 3 x 400mm rolls dependent on your specific requirements.
Celotex TD4000 provides a quick and easy way to achieve effective thermally insulated flat roof decks for building structures such as small extensions or garage roofs where there will only be occasional trafficking. With low emissivity foil facings, TD4000 is manufactured from rigid polyisocyanurate (PIR) using a blowing agent that has zero ozone depletion potential (zero ODP) and low global warming potential (GWP).
With Celotex TD4000 you are specifying an insulation board that:
Knauf Wallboard is plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Knauf Wallboard complies fully with BS EN520 and is categorized as Type A.
Acoustic Partition Roll for metal and timber stud partitions
Acoustic Partition Roll is a flexible, resilient, roll of glass mineral wool. It is supplied in dimensions to suit studs at standard 600mm centres.
Acoustic Partition Roll is designed specifically for the sound insulation of metal and timber stud partitions. Using mineral wool as a sound absorbent layer in partitions will significantly improve their acoustic performance, whilst only adding minimally to the overall mass of the structure. The mineral wool complements the plasterboard by absorbing airborne sound in the cavity and reducing reverberation. It also has the effect of reducing the hollow sound that can occur in partitions with unfilled cavities.
Metal stud partitions faced with standard 12.5mm plasterboard and infilled with Acoustic Partition Roll can meet the requirement for a 40 Rw dB sound reduction in accordance with Approved Document E of the Building Regulations.
Acoustic Partition Roll has exceptional acoustic absorption properties.
Acoustic Partition Roll is classified as Euroclass A1 to BS EN ISO 13501-1
An easy-to-fit, semi-rigid slab for acoustic metal partitions.
Rockwool Acoustic Partition Slab is a high-quality resin bonded semi-rigid slab, designed to combine optimum acoustic and fire performance with easy fitting into metal partitions.
Rockwool rigid, Semi-rigid and Flexible Slabs are high-quality resin bonded Rockwool Slabs that can be used for thermal, acoustic and fire insulation. They are manufactured in a variety of thicknesses and densities to suit most requirements. They are suitable for many applications, including thermal insulation for floors, walls, roofs and boiler rooms.
Ventilation plants in all types of buildings, offshore platforms and ships, acoustic ceilings and partition panels.
A glass mineral wool full-fill cavity slab providing thermal performance in masonry cavity walls to meet Part L Building Regulations (England and Wales).
Celotex TB4000 is a multi-purpose insulation board developed to provide simple solutions for overcoming localised thermal bridges. With low emissivity foil facings, zero ozone depletion potential (zero ODP) and a low global warming impact.
With Celotex TB4000 you are specifying an insulation board that:
Celotex GA4000 is a general purpose insulation board for floors, walls and roofs. It has long been at the heart of the Celotex product range providing the user with a range of thermal insulation solutions.
With low emissivity textured aluminium foil facings, low emissivity foil facings, zero ozone depletion potential (zero ODP) and a low global warming impact.
With GA4000, you are specifying an insulation board that:
CFC & HFC free, seals irregular gaps & expands to over 40 times the cans volume. Thermal Conductivity (w/mK) 0.032.
Up to Four Hour Fire rating with Integrity & Insulation in gaps of up to 45mm. Tested horizontally & vertically.
Offers up to 60dB sound reduction.
Tested to BS 476 Part 20
Performance assured if used correctly.
TNF240 Fire Rated and Acoustic Foam have been tested to BS476 Part 20 1987 and Class B1 Din 4102.
For joints/gaps in compartment walls and floors, fire & acoustic sealing around lightweight partitioning, fire-rated doors and service penetrations where the integrity and insulation of the firewall need to be maintained.
Exton TNF240 Fire Rated and Acoustic Foam have been tested to BS476 Part 20 and Class B1 Din 4102.
TNF240 Fire Rated and Acoustic Foam have been tested toBS476 Part 20 1987 Warrington Fire Research Report Warres Nº 117611.
Speedline Soundseal is a soundproof, viscoelastic, damping compound and is used between the layers of building materials such as drywall and sub-flooring, it is a quick and easy remedial solution or upgrade that can improve performance by up to 5dB.
Karmaplus Acoustic Perimeter Strip is installed at the floor and wall perimeter of a structure. It is required to isolate a floating floor fully to stop flanking transmission.
Karmaplus Acoustic Perimeter Strip consists of 100% recyclable non-crosslinked polyethylene foam and is designed to prevent any flanking transmission and maintain the acoustic integrity of the structure.
Available in 5mm and 10mm thicknesses, 100mm and 150mm widths and 25m rolls.
A new generation mineral wool providing exceptional fire performance yet in a flexible and easily installed acoustic roll for use in partitions and drywall systems.
ULTIMATE™ Protect is a new generation mineral wool that combines all the advantages of conventional thermal and acoustic insulation with increased fire protection.
The ULTIMATE™ Protect product range, also known as U Protect, consists of slabs and wired mats which offer up to two hours fire protection for both rectangular and circular ductwork systems.
Rocksilk Smoke and Fire Barrier is a noncombustible flexible mattress faced on one side with galvanized wire mesh, which is stitched to the mattress with wire. Rocksilk Smoke and Fire Barrier is available unfaced or foil faced on one or both sides and is labeled with a continuous identifying strip, between the wire mesh and the mineral wool.
Rocksilk Smoke and Fire Barrier is a noncombustible mattress made from inorganic rock wool, defined as mineral wool in BS 3533: 1981 and is manufactured to a Quality Assurance system which complies with BS EN ISO 9001:2000.
The base mineral wool of Rocksilk Smoke and Fire Barrier is non-combustible to BS 476: Part 4: 1970 (1984), Class 1 surface spread of flame to BS 476: Part 7 1997 and Class O to the Building Regulations. Fire Resistance is effective from either side of the barrier and the test included vertical and horizontal joints. A 50mm Rocksilk Smoke and Fire Barrier satisfy the criteria laid down in the Building Regulations for half-hour cavity barriers.
Rocksilk Smoke and Fire Barrier is rot proof, does not sustain vermin and will not encourage the growth of fungi, mold or bacteria. Rocksilk Smoke and Fire Barrier is odourless and non-hygroscopic.
Rocksilk Smoke and Fire Barrier are used for the compartmentation of large cavities. It can be used in the following applications:
Handling & Storage
Rocksilk Smoke and Fire Barrier are supplied in polythene packs.
Rocksilk Smoke & Fire Barrier has been subjected to full-scale fire resistance tests to BS 476: Part 22: 1987